Barrel Blanks – Gunsmith Barrel Blanks

Barrel blanks intended for professional gunsmith machining and firearm barrel manufacturing.

We offer barrel blanks in various calibers, lengths and diameters suitable for custom rifle projects and firearm barrel production.

Product sorting

List of products

9 luger 25mm 95 mm 1
More for less
29 €

9 mm Luger barrel blank. Length 95 mm and outer diameter 25 mm. Intended for further professional machining.

Code: 9A95
22 LR 100 30
More for less
30 €

.22 LR barrel blank. Length 100 mm and outer diameter 30 mm. Intended for further professional machining.

Code: 22100
22 LR 150 30
More for less
30 €

.22 LR barrel blank. Length 150 mm and outer diameter 30 mm. The bore has 6 grooves with a twist of 406 mm (≈ 1:16″). Intended for further professional machining.

Code: 22150
.223 Remington barrel blank - 100 mm / Ø25 mm / twist 1:12″ - Iveta Balková-Rifle Construct.Slovakia.
More for less
32 €

.223 Remington barrel blank. Length 100 mm and outer diameter 25 mm. Rifled bore with a twist of 1:12″ (≈ 305 mm). Intended for further professional machining.

Code: 223100
38 spec 100 30 1
More for less
32 €

.38 Special barrel blank. Length 100 mm and outer diameter 30 mm. Intended for further professional machining.

Code: 38100
9 luger 30mm 110mm 2
More for less
32 €

9 mm Luger barrel blank. Length 110 mm and outer diameter 30 mm. Intended for further professional machining.

Code: 9A110P30
22lr100vsetin
More for less
33 €

.22 LR barrel blank. Length 100 mm and outer diameter 30 mm. Intended for further professional machining.

Code: 22100V
76A100
More for less
33 €

7.62x39 mm barrel blank. Length 100 mm and outer diameter 25 mm. Rifled bore with a twist of 240 mm (≈ 1:9.45″). Intended for further professional machining.

Code: 76A100
9 mm Luger barrel blank - 110 mm / Ø15 mm - ISB Precision s.r.o.
More for less
33 €

9 mm Luger barrel blank. Length 110 mm and outer diameter 15 mm. Intended for further professional machining.

Code: 9A110
.223 Remington barrel blank - 150 mm / Ø25 mm / twist 1:7″ - Iveta Balková-Rifle Construct.Slovakia.
More for less
38 €

.223 Remington barrel blank. Length 150 mm and outer diameter 25 mm. Rifled bore with a twist of 1:7″ (≈ 178 mm). Intended for further professional machining.

Code: 223150.
38 spec 150 30 1
More for less
38 €

.38 Special barrel blank. Length 150 mm and outer diameter 30 mm. Intended for further professional machining.

Code: 38150
7.62x39 mm barrel blank - 150 mm / Ø25 mm / twist 240 mm - Iveta Balková-Rifle Construct.Slovakia.
More for less
38 €

7.62x39 mm barrel blank. Length 150 mm and outer diameter 25 mm. Rifled bore with a twist of 240 mm (≈ 1:9.45″). Intended for further professional machining.

Code: 76A150
7,65 L150 25 1
More for less
38 €

7.65 Browning (.32 ACP) barrel blank. Length 150 mm and outer diameter 25 mm. The bore has 6 grooves with a twist of 250 mm (≈ 1:9.84″). Intended for further professional...

Code: 765150-25
9 luger 25mm 150mm 2
More for less
40 €

9 mm Luger barrel blank. Length 150 mm and outer diameter 25 mm. Intended for further professional machining.

Code: 9A150
stock barrelblank
New More for less
43 €

Barrel blank 9x19 mm (9 mm Luger). Length 150 mm and outside diameter 30 mm. The bore has 6 grooves with a twist of 250 mm (≈ 1:10“). Intended for further professional machining.

Code: 9A150-30.

Listing controls

161 items total
Top

Barrel blanks for professional gunsmith machining

A barrel blank is a precision-made steel semi-finished product with a rifled or smooth bore, intended for further professional machining. It is not a finished barrel ready for installation in a firearm.

Our range includes shorter and longer barrel blanks suitable for rifle, pistol, shotgun and percussion applications. Individual variants may differ in caliber, length, outer diameter, twist rate, number of grooves, material and manufacturing method.

Barrel blanks can be used for the manufacture of new barrels, replacement barrels and custom gunsmithing projects. Always check the specifications stated on the individual product page before placing your order.

Caliber and bore diameter

Select the blank according to the required caliber and the intended firearm or gunsmithing project.

Length and outer diameter

Check that the dimensions provide sufficient material for final profiling, threading and fitting.

Twist rate

The appropriate twist rate depends primarily on the caliber, bullet length, bullet weight and intended use.

Material and construction

The steel grade, manufacturing method and number of grooves may vary depending on the selected product.

Browse barrel blanks by caliber type

Important information The products offered in this category are unfinished barrel blanks intended for further professional machining. Chambering, external threading, final profiling and installation in a firearm must be carried out by an appropriately authorised person and in accordance with the laws applicable in the country where the machining and use take place.

Frequently Asked Questions (FAQ)

What is the difference between a barrel blank and a finished barrel?

A barrel blank is a semi-finished product intended for further machining. It normally requires chambering, external profiling, threading, fitting and other operations before it can become a finished firearm barrel.

Do the barrel blanks have a chamber?

Unless explicitly stated otherwise in the product description, the barrel blanks are supplied without a finished chamber. The chamber must be machined later for the selected cartridge and firearm design.

Can a barrel blank be purchased in Slovakia without a firearms licence?

Yes. Under Slovak Act No. 190/2003 Z. z., a barrel is considered a main firearm component and is defined as including a chamber. The barrel blanks offered by Barrel22 are unfinished blanks without a chamber and may therefore be purchased in Slovakia without a firearms licence. Machining a blank into a finished barrel and installing it in a firearm must be carried out by a person holding the appropriate authorisation. Customers outside Slovakia must comply with the laws of the destination country.

How do I choose the correct barrel blank?

Consider the required caliber, blank length, outer diameter, twist rate, number of grooves and material. The blank must also provide enough material for the planned final dimensions and machining operations. If you are unsure, consult the gunsmith who will carry out the work before ordering.

What does the twist rate mean?

Twist rate indicates the distance over which a projectile completes one full rotation inside the bore. For example, a twist rate of 1:10" means one full rotation in 10 inches. The optimal twist depends mainly on the caliber and the length and weight of the projectile.

Do all barrel blanks have the same technical specifications?

No. The available products may differ in caliber, length, outer diameter, twist rate, number of grooves, steel grade and manufacturing method. The specifications listed on the individual product page always apply to the selected variant.

What if the required caliber or dimensions are not listed?

Please contact us at info@barrel22.eu and provide the required caliber, length, outer diameter and other relevant parameters. We will check the available options.

Who may machine a barrel blank?

Machining that turns a blank into a finished barrel, as well as its installation in a firearm, should only be performed by a suitably qualified and authorised person. All work must comply with the laws applicable in the country where it is carried out.